Do you have a question about the MXL R144 and is the answer not in the manual?
Crucial warning against phantom power use to prevent ribbon element damage.
Recommends high-quality cables for optimal sound and to prevent noise or distortion.
Guidance on correctly centering and securing the microphone in the shock mount.
| Type | Ribbon |
|---|---|
| Frequency Response | 20Hz - 17kHz |
| Polar Pattern | Figure-8 |
| Output Impedance | 250 ohms |
| Max SPL for 0.1% THD | 130 dB |
| Output Connector | 3-pin XLR |
| Dimensions | 47mm x 171mm |
| Sensitivity | -56 dB (0 dB=1V/Pa) |