- 17 -
The collar is designed to run in Dual mode
(both Fence and remote trainer mode) or
single mode (Fence only)
Please make certain the collars are fully charged by
leaving them on charge for Minimum 8-10 hours
before first use.
Turn on the collar by pressing and holding the
on/off button for 3-4 seconds and release once you
hear the double beep sound.
The green LED will flash ONCE every 5 seconds
indicating that the collar is paired to the remote and
in Dual Mode (Factory Default). In Dual Mode
the collar can be used as both a fence containment
system and simultaneously as a remote training
collar.
It is strongly recommended only to use Dual Mode
when you are using the collar for both pet
To Next Page
Loading...