- 18 -
containment and remote training purposes
simultaneously. When the system is being used
for containment purposes only, it is strongly
recommended to switch the collar to Single Mode
only to substantially increase the battery
life of the collar for fence operations.
To switch/toggle the collar to Single Mode do the
following:-
While the Collar is in the on position (Green LED
flashing once every 5 seconds), hold down the
on/off button till the LED turns RED and then
release as soon as you see the red light. The Collar
will then flash green twice every 5 seconds
Indicating it is now in Single Mode (Fence
Containment System only).
To switch/toggle back to Dual Mode follow the
same procedure as stated above.
To switch off the collar keep on holding the on/off
To Next Page
Loading...