- 22 -
I. Position the Fence Transmitter: To avoid
power shortages and proper function, install
the Fence Transmitter inside a building or
covered area away from the elements. Place
the Fence Transmitter in a dry waterproof
area where the temperature will not fall below
freezing and at least three feet from any major
appliance.
II. Layout the system and position the
boundary wire: Design a Boundary Wire
layout that is suitable for your yard. The
Boundary Wire must start at the Fence
Transmitter and make a continuous loop back.
Important: Running the Boundary Wire parallel
to or within five feet of electrical wires,
neighboring containment systems, telephone
wires, television or antenna cables, or satellite
dishes will cause an inconsistent signal. If you
To Next Page
Loading...