- 38 -
Match/Pair it to the desired position on the
remote control that you have
Now let’s cover how to match/pair a collar to
your system.
NB !!! Collar/Receiver must be in Dual
mode ….Only in Dual can the receiver collar
can be matched and unmatched
Step 1 : Take an unmatched/unpaired
receiver you wish to match and press
and hold the “ON/OFF” button. After
two “beeps”, the receiver is powered
on and you will notice the green LED
flashing frequently. (Note: never
switch on 2 or more unmatched
receivers at one time.)
To Next Page
Loading...