- 39 -
Step 2 : Press and hold the “ ” button on
the transmitter until the LCD display
screen comes on. Release the button,
and now the transmitter is power on.
Step 3 : Press and hold the “ ”button and
“ ” button at the same time, until the
digital number on the LCD display
begins changing automatically, then
release. This means you have now
entered match mode. (The numbers
changing will look something like
“08,09,10,11……”, increasing
automatically.)
Step 4 : Place the unmatched Receiver Collar
within 50~100mm of the transmitter.
To Next Page
Loading...