- 40 -
Step 5 : Press and hold on the Dog selection
button of your choice. Press and hold
“1” to match the Receiver Collar as the
#1 dog, press and hold “2” to match
the Receiver Collar as the #2 dog, or
press and hold“3” to match the collar
as the #3 dog. After doing this you’ll
hear five “beeps” from receiver and
see the green LED flash slow down.
Release the button at this point.
Important: You must confirm that
you hear the five “beeps” from the
unmatched receiver and see the
green LED light flash slow down
first, before releasing the dog
selection button. If your match
attempt fails, you may need to
cancel the failed matching receiver
and attempt to re-match again.
Step 6 : Press and hold the “ ” button and
To Next Page
Loading...