- 42 -
NB !!! Collar/Receiver must be in
Dual mode ….Only in Dual can the
receiver collar can be matched and
unmatched.
Unmatching/Unpairing Procedure
If you require to unmatch/unpair a collar
for example you have got a new remote
etc.… follow these steps:-
Step 1 : Take the receiver you wish to
unmatch and press and hold the
“ON/OFF” button. After two “beeps”,
the receiver is powered on and you
will notice the green LED flashing 1
time per 5 seconds.
Step 2 : Press and hold the “ ” button on
To Next Page
Loading...