- 43 -
the transmitter until the LCD display
screen comes on. Release the button,
and now the transmitter is power on.
Step 3: Press and hold the “ ” button and
“ ” button at the same time, until the
digital number on the LCD display
begins changing automatically, then
release. (The numbers changing will
look something like “08,09,10,11……”,
increasing automatically.)
Step 4 : Place the Receiver Collar within
50~100mm of the transmitter and
then press the dog selection button of
your choosing. (You can press “1” or
“2” or “3”). Once you make your
selection, you should hear five “beeps”
sound from receiver.
Step 5 : The green LED light on the Receiver
To Next Page
Loading...