EasyManua.ls Logo

MY PROJECT MPMAP 12000 C3 - Accident and Injury Prevention

MY PROJECT MPMAP 12000 C3
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
GB
the device. There is a risk of overheating!
Switch the device off and remove the
plug from the socket in the following
cases:
when you are not using the device;
if you are leaving the device
unsupervised;
when you are carrying out cleaning
or maintenance work
if the connection cable is damaged
if foreign objects have got into the
device or you notice unusual noises
Only use the accessories supplied and
recommended by the manufacturer.
Do not dismantle or modify the portable
jump starter with power bank. This device
must only be repaired by a maintenance
technician.
Do not use the device in areas with a
risk of explosion, e.g. near flammable
liquids, gases or powders.
Do not expose the device to any source
of heat.
Do not store in places where the
temperature can exceed 70 °C.
Only charge in an ambient temperature
between 0 °C – 40 °C.
Only use the 3-way USB cable
16
as
supplied with the device.
CAUTION! How to avoid
accidents and injuries resulting

Table of Contents