AC ELWA
®
-E Operation Manual, Version 00200.01 8
Boost active 0: Boost inactive
1: boosting via time control
2: manual boost
Next legionella boost on/off, days
Time system time of the device / hh:mm:ss
Control Status describes the current control mode
Block active Shows whether the device is blocked
Depending on which other measurements are queried in the system (see "Measurement
Settings"), the status overview also provides information on these variables.
Data logger
A graphical information of the operating data is provided in the data platform my-PV.LIVE (see
"Cloud Mode").
Setup
On this page all adjustments of the device can be made.
Boost Settings
As an option, the AC ELWA-E can also ensure a minimum temperature in addition to the normal
excess power operation. During backup operation the device is supplied with a power of 3kW.
Boost Mode Off
This is the factory preset. Hot water securing is deactivated. Only PV-excess
is used.
To Next Page
Loading...