Need help?Do you have a question about the MyBinding IDEAL 4810-95EP and is the answer not in the manual?
Read and follow all operating and safety instructions before use.
Ensure the machine is operated only by trained adults and kept away from children.
Warnings and precautions for handling the sharp blade during operation and maintenance.
Ensures safe operation through guards, proper power connection, and switching off procedures.
Instructions for assembling the stand and lifting the machine safely onto it.
Attaching side tables, backgauge adjustment, and power connection for specific models.
Ensures correct setup, safety checks, and machine activation before cutting operations.
How to manually set cutting dimensions using the backgauge and related indicators.
Steps for clamping paper, activating the cut, and handling the cutting process.
A detailed overview of the machine's operating elements and controls.
Detailed guide on programming cutting sequences, multiple cuts, and eject functions.
Guidelines for checking cutting quality and determining when to replace blade or cutting stick.
Step-by-step guide for safely removing and installing the cutting blade.
Procedures for replacing, turning, or exchanging the cutting stick.
Performing a test cut after replacement and adjusting blade depth for optimal results.
Emphasizes disconnecting power and using trained personnel for maintenance tasks.
Guidelines for greasing moving parts and checking components for wear.
Recommends periodic safety checks by authorized teams, typically every five years.
Initial checks for power, main switch, and control system activation when the machine doesn't function.
Resolving problems where the cut cannot be made due to cover issues or incorrect settings.
Explains reasons for machine shutdown like overload, blockage, or blunt blades, and safety button function.
Solutions for incomplete cuts or poor quality, including blade and cutting stick adjustments.
Troubleshooting problems related to the display illumination and motor operation.
Addressing specific issues like measurement errors, backgauge problems, and when to contact service.
Catalog of recommended accessories such as blades, cutting sticks, and tools for the machine.
Provides power supply, dimensions, weight, sound level, and compliance certifications.
General| Weight | 507 lbs |
|---|---|
| Cutting Width | 18.9 inches |
| Cutting Thickness | 3 in |
| Cutting Length | 18.9" |
| Dimensions | 30.5" x 33.5" x 50" |
| Narrow Cut | 1.37 inches |
| Table Depth | 800 mm |
| Cutting Capacity | 10 mm |
| Safety Features | Transparent safety guard |
To Next Page
