What to do if the MyBinding Standard APC45 Programmable sheet remains uncut?
If the MyBinding Cutter isn't cutting all the way through the sheets, it could be due to a worn cutting stick. Try using another face of the cutting stick. Also, a dull knife can cause this issue, so replacement of the knife may be necessary.
Why are some of the cut sheets bent when using MyBinding Standard APC45 Programmable Cutter?
If the cut sheets are bent when using your MyBinding Cutter, it could be because the cutting stick is worn. Try using another face of the cutting stick. Another possibility is that the knife has become dull, requiring replacement.
How to fix sheets cut diagonally with MyBinding Standard APC45 Programmable Cutter?
If your MyBinding Cutter is cutting sheets diagonally, ensure the sheets hit the back-gauge properly. Air between the sheets can also cause this, so press the sheets to remove air before cutting. It could also indicate that the knife is dull and needs replacement.
What to do if diagonal line appears on the cut surface of MyBinding Cutter?
General| Type | Programmable Cutter |
|---|---|
| Cutting Width | 17.7 inches |
| Max Cutting Width | 17.7 inches |
| Dimensions | 35 x 31 x 27 inches |
| Power Supply | AC 110V 60Hz |
| Program Memory | 99 programs |
| Safety Features | Two-hand operation |
| Power Requirements | AC 110V 60Hz |
Defines safety terms and explains warning symbols used in the manual.
Covers warnings and cautions for operating and maintaining the paper cutter safely.
Details cautions for installation, required space, and antivibration cushion usage.
Verifies power switch function and backgauge initialization process.
Tests cutting buttons, beam sensors, and foot pedal for proper safety operation.
Ensures correct operation of the control panel, backgauge movement, and input.
To Next Page
