- 13 -
A
C
A
C
IDEAL 5221-95EP
The machine is delivered ready for operation.
4 strong people are required to lift the
machine from the pallet.
Side tables, left and right, (A) are available
as accessories.
Attach the side tables to the front table so
that the upper surface is level.
(Screws and nuts are in a plastic bag in the
tool set (C).
The front and rear wooden panels must be
removed for in-house transport on a pallet
truck.
For transport through narrow doors:
•
Remove side tables
•
Remove the machine from its base
(4 screws)
•
Tilt the machine on its side
•
Mount the machine to its base
•
Screw on all side panels
Only IDEAL 4810-95, 4850-95, 6550-95
Tighten the backgauge crank (A). Parts and
tools are in the tool set (C).
•
Installation
•
To Next Page
