- 28 -
IDEAL 4810-95/EP • IDEAL 4850-95/EP • IDEAL 5221-95EP • IDEAL 6550-95EP
If the cutting quality decreases:
•
Check the cutting depth (see page 36).
•
Check the cutting stick (see page 32).
•
Replace or grind the blade (see page
28 - 36).
The blade cannot be ground if the blade
height is less than 83 mm/3,29 inches.
A new blade must be used.
The blade may only be ground by a qualified
supplier or from the manufacturer
Krug & Priester, D-72336 Balingen.
Danger! Risk of injury!
The blade is extremely sharp. Do not extract or
transport the blade without protection. Chan-
ging the blade may only be performed by
trained staff.
•
Blade and cutting stick replacement
•
To Next Page
