1.
3.
2.
A
2.
1.
Lightly tighten 3 (IDEAL 4810-95/EP,
IDEAL 4850-95/EP has 2) of the 5 blade
screws with washers (1.). Remove the blade
changing tool (2.). Lightly tighten the
remaining blade screws with washers (3.).
IDEAL 4810-95/EP and IDEAL 4850-95/EP
Lightly screw in the right blade screw with the
washer (A) when the blade is lowered.
Remove all tools and distribute paper along
the entire cutting length (1.).
Turn main switch to position "I" (2.).
•
Blade and cutting stick replacement
•
To Next Page
Loading...
