Screw Compressor i-series
iv
[Tagout] To prevent any inappropriate work by hanging tag plates indicating "work in
progress".
“Tagout” means to clearly indicate, by hanging tag plates, that a device is in lockout and that
operation of the device is prohibited. Tag plates forbidding operation, starting, opening, etc. are
warnings clearly stating to not operate energy (power) sources, and are not for stopping blocking
devices.
Observe the following precautions when performing maintenance work on electrical control.
Electrical maintenance of the product must be performed by certified/qualified personnel and
only those educated about the electrical control of the product.
Before servicing or inspecting the electrical equipment or devices, turn "OFF" the motor main
power and control power, and perform lockout/tagout to prevent the power from being turned
on during work.
Even when the motor main power and control power are turned "OFF", this product may be turned on if
the power is supplied from outside the package unit in which this product is used. Make sure the power
supply on the power source side is shut off, and perform lockout/tagout to prevent the product from
being turned on during work.
About This Manual
This product may be modified without prior notice. Therefore, the appearance of actual
machine may differ from the descriptions in this manual. If you have any questions, contact
our sales offices or service centers. For each sight of MAYEKAWA, refer to following URL.
http://www.mayekawa.com/about/network/
This manual is in English. If any other language is required, it is the customers’ responsibility
to prepare a manual for safety education and operation instructions.
This manual is copyrighted. Drawings and technical references including this manual shall not,
in whole or part, be copied, photocopied, or reproduced into any electronic medium or
machine-readable form without prior permission from MAYEKAWA.
Photographs or drawings included in this manual may differ from the appearance of actual
product.
If this manual is lost or damaged, immediately request to one of our local sales offices or
service centers for a new manual. Using this product without the manual may result in safety
issues.
When you resell this product, be sure to transfer this manual to the next owner.
To Next Page
Loading...
Need help?
General
