Mylaps RC4 - Specifications RC4 Decoder

RC4 decoder V2.0. - October 2017 © MYLAPS rights reserved 7
2.2. Specifications RC4 Decoder
Dimensions
180 x 160 x 45 mm / 7 x 6.3 x 1.8 in
Weight
720 g / 1.6 lb
Decoder Clock stability
0.5 ppm
Decoder Timing Resolution
0.001 s
Time of day clock stability (decoder off)
+/- 25 ppm
Time of day clock stability (decoder on)
+/- 0.5 ppm
Time of day clock resolution
1 sec.
Time of day clock synchronisation
via GPS receiver to UTC
Max. track width
max. 20 m / 66 ft
Operating temperature range
-20 to 50 C / -4 to 122 F
Humidity range
10 % to 90 % relative
Operating voltage range
10 to 14.4 V, typical 12V
Power consumption
max. 650 mA @ 12V, typical 500 mA
Interfaces
RS232, 9600 baud, 8 bits, 1 stopbit
RJ45,10/100 BaseT USB A
Network connection
DHCP client, APIPA, Static IP
Aux. Power
5 VDC, max 100 mA
Aux. Output
Opto coupled closing contact max 50 mA switched
Aux. Inputs
3x Opto coupled 5-12 VDC / 5-15 mA
Compatibility
RC3, RC4, RC4 hybride and DR5 transponders.
Specifications are subject to change without notice.