MyRepublic Wi-Fi Hub - User Manual

Manual

Summary

Setting Up: Basics

How to Set Up Your Wi-Fi Hub

Provides step-by-step instructions on connecting and powering on the Wi-Fi Hub, including placement and initial checks.

Connect Your Device to Wi-Fi Hub

Explains how to connect devices to the Wi-Fi Hub, either wirelessly using the Wi-Fi Security Card or via an Ethernet cable.

Log Into Router Management Console

Guides users on accessing the Wi-Fi Hub's web-based management console using a browser and default credentials.

Use Quick Setup Wizard

Details the steps for using the Quick Setup Wizard to personalize router settings like security, internet, and Wi-Fi configuration.

Setting Up: Advanced

Manage Router Console Credentials

Change Wi-Fi Network Name and Password

Provides instructions on how to manually modify the SSID (network name) and password for the 2.4GHz and 5GHz Wi-Fi networks.

Install Router Firmware

Limit Device Access (Parental Controls)

Set Up Port Forwarding

Troubleshooting

Power Cycle Wi-Fi Hub

Factory Reset Wi-Fi Hub

Details how to perform a factory reset on the Wi-Fi Hub using the reset button to restore default settings.

Recover Wi-Fi Password

Wi-Fi Detection Issues

Wi-Fi Hub Not Powering On

Wi-Fi Connectivity Issues

Addresses problems like intermittent disconnections, low signal, or slow speeds, suggesting power cycling, direct connection tests, and firmware updates.

MyRepublic Wi-Fi Hub Specifications