MyRepublic Wi-Fi Hub User Manual

10
How to set up your Wi-Fi Hub
1. Place your Wi-Fi Hub in a location that is away from direct sunlight, metal equipment
and other devices that may interfere or cause Wi-Fi signal loss (e.g. microwave ovens,
cordless phone). If you can, place your Wi-Fi Hub in an elevated position as Wi-Fi
signals spread out and towards the ground, not upwards.
2. Connect the Wi-Fi Hub to its power adapter and plug it into a power supply.
3. Press the Power button to power on the Wi-Fi hub. The front LED lights on the Wi-Fi
Hub should light up with the Power light eventually turning a solid green.
Setting Up: Basics
Note:
• First make sure that your Internet connection has been set up and working properly. Your ONT
should be connected to your bre Termination Point (TP) and turned on for at least 2 minutes
before setting up your Wi-Fi Hub. There should also be no red or yellow lights on your ONT.

MyRepublic Wi-Fi Hub Specifications

General

Brand	MyRepublic
Model	Wi-Fi Hub
Category	Network Router
Language	English