Myson Touch RS - Locking the Keypad; Temperature Override

Locking the Keypad
The thermostat has a keylock facility. To enable this press the
bottom right corner of the display and hold for 10 seconds.
When activated, you will see
.
To cancel, repeat the steps above.
Temperature Override
Usingthe keys allows you to adjust the set temperature.
When you press either of these keys, you will see the word
SETandthedesiredtemperature.PressDONEtoaccept.
Note: You should note that this new temperature is
maintained only until the next programmed comfort
level. At this time, the thermostat will revert back to the
programmed levels.
12