MZ electronic HC020 User Manual

HC020 Rev. 02-2021
English
24
Reset Measurement
Resets the chain measurement value (0.0).
Select with
= Yes = No
Confirm with
Units
Selects the unit of measurement:
Feet/ inches
Metres / centimetres
Select with
= Feet = Metres
Confirm with
Exit
To return to the settings menu.
Confirm with
Functions menu
FUNCTIONS
AUTO DOWN OFF
DEFAULT
EXIT
UP ALARM 2.5
Use the (DOWN) or (UP) key to move around the parameters.
Up Alarm
It is possible to enable the function and
establish the height at which the anchor-
winch stops; after which it is only possible to
give pulsed commands.
Settable values: OFF, 0.5 – 1.0 – 1.5 – 2.0 –
2.5 - … 10.0 (metres or feet).
Select with
Select value with
Confirm with
Auto Down
Enables the automatic anchor lowering
procedure, at the desired height, with the
pressing (for at least 3 seconds) of the keys
and .
Settable value: OFF, 1,2,3…25 (metres or
feet).
Select with
Select value with
Confirm with
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing
all settings memorised.
This command must only be used in the
event of programming errors.
Select with
= Yes = No
Confirm with

MZ electronic HC020 Specifications

General

Brand	MZ electronic
Model	HC020
Category	Cash Counter
Language	English