N-Com B901 - Keypad Installation (N87;N100-5)

EN
10
3.5. Installing the battery and the right-hand side speaker
 Connect the battery to the wiring system. (Fig. 16)
 Position the battery in the right polystyrene cheek pad housing and secure it using the Velcro
ribbon. (Fig. 17 / 18)
Fig. 16 Fig. 17 Fig. 18
Fig. 19
 Position the right-
hand side speaker in the
specific cheek pad housing and secure
it using
the specific adhesive (Fig. 19).

Reposition the right polystyrene cheek pad in
its housing.
ONLY FOR FULL-FACE HELMETS: Insert the chin strap into the polystyrene cheek pad loop.
Fig. 20

Arrange the battery connector behind the
polystyrene cheek pad.

Arrange the cable behind the polystyrene shell
or inside the relevant housing.