N-Com B902L User Manual

EN
26
16. INTERCOM
The N-Com B902L system allows communication with other N-Com systems, up to a maximum
distance of about 700 m (in open field, with no obstacles). The range of the communication varies
depending on the N-Com systems used.
N.B.:
The range and quality of the communication may vary significantly depending on the presence
of obstacles, weather conditions, magnetic fields.
16.1. N-Com “600”/”900” Series Intercom pairing up
Important: The procedure described below refers exclusively to the pairing up between the
“600”/”900” series N-Com systems.
• Make sure the systems are turned off.
• Put the systems in “Pairing up” menu: press the “
ON
” key and keep it pressed for 4 seconds, until
you hear the voice announcement “
Pairing up Menu
”.
• On both systems, press the key “” until you reach the option “
Intercom pairing
”.
• On system A, press the key pertaining to the “pre-setting position” where you wish to save
system B.
Pairing up CHANNEL 1
Briefly press “
n
”.
Pairing up CHANNEL 2
Press the “
n
” key twice.
Pairing up CHANNEL 3
Press the “
n
” key three times.
• No key must be pressed on system B.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
Through the N
-
Com EASYSET APP, the “
Intercom Easy Pairing
” can be carried out. This
mode allows the N-Com systems to be recognised and stored through a QR code
generated on one’s smartphone.
The Intercom Easy Pairing function is only available for B902 systems.
16.2. Pairing up other N-Com
Important: The procedure described here below refers exclusively to the pairing up of “900” series N-
Com systems with N-Com systems OTHER THAN the “600”/“900” series
1
.
• Make sure the systems are turned off.
• Put B902 system in “Pairing up” menu: press the “
ON
” key and keep it pressed for 4 seconds, until
you hear the voice announcement “
Pairing up Menu
”.
• Put the N-Com system in “Setting” mode: press the “
ON
” key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
• On B902 system, press the key “” until you reach the option “
Pairing up other N-Com
”.
• On B902 system, press the key pertaining to the “pre-setting position” where you wish to save the
other N-Com system.
1
Except for Bluetooth kit and Bluetooth kit2, which are not compatible.

N-Com B902L Specifications

General

Brand	N-Com
Model	B902L
Category	Motorcycle Accessories
Language	English