Need help?Do you have a question about the Nacra 570 and is the answer not in the manual?
Steps for placing and preparing the boat hulls for assembly, including caution about staples.
Instructions for attaching the trampoline to the forward beam and hull tracks.
Procedure for assembling mast spreaders and connecting diamond wires for support.
Attaching the rotator arm to the mast and downhaul swivel blocks to the mast base.
Guidance on running main and spinnaker halyard lines through the mast and blocks.
Connecting shrouds, forestay, and trapeze wires to the mast hound and securing them.
Assembly of the forestay for roller furling jib systems, including specific Inter 18 details.
Installing downhaul retractor kit and rotator cleats with angled shims.
Installing shroud adjusters, bridle wires, spin pole holder, and forestay adjuster.
Instructions for running, adjusting, and tying the trapeze shock cord and rings.
Safety precautions and initial steps for preparing to step the mast onto the boat.
Detailed steps for raising and securing the mast onto the boat, ensuring proper alignment.
Procedure for aligning the rudders for correct steering performance and boat control.
Instructions for installing and running the jib sheet lines and blocks for sail control.
Steps for connecting the boom to the mast via the gooseneck assembly.
Details on installing rotator limiter lines and the purchase system for sail control.
Procedure for threading the mainsheet line through the blocks for sail control.
Instructions for tying and running the traveler line for adjusting the car position.
Steps for attaching the jib, running the jib, and tensioning the forestay.
Instructions for inserting battens into the mainsail pockets for optimal sail shape.
Steps for raising and safely lowering the mainsail using the halyard.
How to attach spinnaker sheet ratchet blocks to the hull or shroud adjuster.
Instructions for assembling the snuffer head, pole, and bridle wires for spinnaker dousing.
Specifics on attaching snuffer bridle wires for the Inter 17 model.
Overview of the self-tacking jib system, including pre-mounted track and control lines.
Detailed steps for attaching the jib traveler car and running jib control lines.
Essential safety tips and practices for sailing and beaching the catamaran.
Information on the approved design category and operating conditions for the craft.
Details on the catamaran's capacity and recovery after capsize.
Important general notes on crew training, load limits, and watertight integrity.
To Next Page
General