NA
D
17
GB
flashing. A short flash indicates a function is switched
off; a long flash indicates it has been selected.
2. To change the function press the appropriate
input; the LED in the button indicates if the function has
been selected (long flash) or not (short flash).
See table below for available functions :
3. When the desired configuration has been selected,
press any of the buttons on the front panel, apart from
the High Gain (21) and the input selector buttons (4 to
12). The pre-amp now resumes normal operation with
the new configuration.
Input selector LED Function;
Digital inputs:
Disc On: ADC sampling frequency is 48kHz; off: 44.1kHz.
Tuner Unassigned
Video On: Disable Digital Pre-out
Tape On: Disable volume control; digital gain set to 0dB
Analogue inputs:
Disc On: Clear EEPROM; return to factory default settings
Tuner On: Dithering for dig. record output always switched on regardless of Process to
tape button position
Video Unassigned
Tape Unassigned
To Next Page
Loading...
