Need help?Do you have a question about the NAD 120 and is the answer not in the manual?
General| Total Harmonic Distortion | 0.03% |
|---|---|
| Input Sensitivity (MM) | 2.5mV |
| Input Sensitivity (line) | 150mV |
| Tuning Range | FM, MW |
| Power Output | 20W per channel (8 ohms) |
| Frequency Response | 20Hz - 20kHz |
| Speaker Load Impedance | 4Ω to 16Ω |
Selects input source (Phono, FM, AM, Aux).
Adjusts audio output level.
Turns the receiver on/off.
Protects receiver from short circuits.
Protects right speaker output.
Protects left speaker output.
Connects magnetic cartridge turntables.
Connects main speaker system.
Connects secondary speaker system.
Details on output stages, frequency response, and distortion.
Details on power output, bandwidth, and sensitivity.
Warning about speaker impedance for dual systems.
To Next Page
