Need help?Do you have a question about the NAD T742 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Tuner | AM/FM |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Preset Station Qty | 30 |
| Surround Sound Formats | Dolby Digital |
| Inputs | 2 x digital audio input (coaxial), 2 x digital audio input (optical) |
| Outputs | audio line-out |
| Response Bandwidth | 20 - 20000 Hz |
| Signal-To-Noise Ratio | 100 dB |
| Tuning Range | FM: 87.5 - 108 MHz, AM: 530 - 1710 kHz |
| Width | 43.5 cm |
| Depth | 380 mm (15 in) |
| Height | 155 mm (6.1 in) |
General safety and operating precautions for the unit.
Guidelines for safe installation practices, including grounding and ventilation.
Explains the meaning of safety symbols used in the manual and on the unit.
Information on power sources, cord safety, and proper usage.
Outputs for connecting external amplifiers or subwoofers.
Instructions for connecting speaker systems to the receiver.
Controls for selecting AM/FM bands, tuning stations, and FM mute/mode.
Adjusts volume and accesses setup menus for speaker configuration.
Selecting audio/video sources like DVD, SAT, VCR, and VIDEO 4.
Cycling through various surround sound modes like Dolby Digital, DTS, and EARS.
Detailed guide to configuring speaker settings, channel delays, and levels.
Adjusting speaker output levels for a balanced listening experience using test signals.
Diagnosing and resolving problems related to no sound, tuner reception, and signal quality.
To Next Page
