Need help?Do you have a question about the NAD T785-R and is the answer not in the manual?
Read all safety and operating instructions before operating the unit.
Keep the manual for future reference.
Do not ignore warning symbols on the unit and in the manual.
Follow all operating and usage instructions.
Ensure adequate ventilation; do not block openings.
Connect only to the specified power type and grounded outlet.
Ensure outdoor antenna is properly grounded.
Disconnect from outlet and antenna during storms.
Refer servicing to qualified personnel.
Explanation of lightning and exclamation mark symbols.
Do not expose to rain or moisture; keep liquids away.
Connect the apparatus to a grounded mains socket.
Maintain clearance for proper ventilation.
Instructions for UK mains plug and fuse replacement.
Introduction to the universal remote control.
Tips for preventing background noise and interference.
Description of the power button function.
Optical and coaxial inputs for digital sources.
HDMI inputs and monitor output.
How to navigate and adjust settings using the remote or front panel.
Description of available listening modes.
How to adjust parameters for various listening modes.
Settings for Pro Logic IIx Movie and Music modes.
Adjusting DSP parameters like Lip Sync Delay.
Configuring and managing audio/video output to different zones.
Configuring audio/video inputs for each source.
Detailed setup for each source in normal view.
Setting speaker distances for accurate timing.
Assigning amplifier channels for surround or multi-zone use.
Explanation of DTS-ES Matrix 6.1 surround sound processing.
Selecting digital audio inputs for sources.
Assigning preset configurations to sources.
Procedure for inputting speaker distances.
Configuring secondary zone audio/video outputs.
Configuring trigger outputs and inputs.
Adjusting Dolby Digital dynamic range and Pro Logic IIx settings.
Adjusting DTS dynamic range and Neo:6 settings.
Viewing and editing source settings in a table format.
How to adjust receiver display and OSD settings.
Configuring speaker system for optimal surround sound.
Setting up speaker sizes (Small/Large) and crossovers.
Automatic speaker setup using the measurement microphone.
Advanced room correction for acoustic optimization.
How the Audyssey system performs acoustic measurements.
Configuring various listening modes for different sources.
Using presets to save and recall custom settings.
Selecting target frequency response curves.
Balancing volume levels for each speaker channel.
Automatic format detection and processing.
Steps for saving current settings as a preset.
Explanation of Dolby Digital formats and options.
How to adjust levels using the test tone.
Explanation of Dolby Digital EX for 6.1 channel surround.
Explanation of DTS digital surround formats.
Information on receiving AM and FM radio stations.
Introduction to DAB digital radio broadcasting.
Overview of the remote control's buttons and display.
General description of the HTRC 1 remote's design.
How to access and use the remote's setup menu.
Operating the receiver from secondary locations.
Common issues and their solutions.
Checks for power, connections, and speaker activation.
Checks for cable issues or incorrect speaker configuration.
Checks for listening mode and speaker configuration.
Checks subwoofer power, connections, and settings.
Checks center channel settings and levels.
Ensures digital output is connected and configured.
Checks batteries, line-of-sight, and IR sensor.
Checks for bright light interference or microprocessor issues.
Technical specifications for the amplifier.
Technical specifications for the AM/FM tuner.
To Next Page
General
