Need help?Do you have a question about the NAD 3240PE and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Damping Factor | 50 |
| Total Harmonic Distortion | 0.03% |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker Load Impedance | 4 to 8 ohms |
| Power Output | 40 watts per channel into 8 ohms (stereo) |
Details audio and power connections on the rear of the amplifier, including inputs and outputs.
Identifies and describes front panel buttons, knobs, and indicators for operation.
Technical specifications for the power amplifier section, including output and distortion levels.
Details specifications for the preamplifier section and various input sensitivities.
Lists physical dimensions, weight, power consumption, and other electrical data.
Procedure for setting the initial center voltage and idling current for the audio section.
Steps for performing final adjustments and checks after the initial alignment.
Schematic details for the input selector and signal routing circuits.
Schematic details for the power amplifier's output transistors and related components.
Lists structural components like chassis, front/rear panels, and associated hardware.
Lists specific resistor and capacitor part numbers, values, tolerances, and ratings.
Details part numbers for various switches, fuses, and connectors used in the unit.
Lists the materials required for packing the unit for shipment, including instructions.
To Next Page
