Do you have a question about the NAD 3240 and is the answer not in the manual?
Power Output | 40 watts per channel into 8Ω (stereo) |
---|---|
Frequency Response | 20Hz to 20kHz |
Damping Factor | 50 |
Input Sensitivity | 2.5mV (MM), 150mV (line) |
Speaker Load Impedance | 4Ω to 16Ω |
Dimensions | 420 x 100 x 300mm (W x H x D) |
Details specifications for the power amplifier stage, including output power and distortion.
Details specifications for the preamplifier stage, including input sensitivity and noise ratio.
Procedure for adjusting center voltage, idle current, and final settings for the main amplifier.
Diagram showing component layout for the preamp and volume circuit boards.
Diagram indicating the location of parts on the volume and preamp circuit boards.
Diagram indicating the location of parts on the main amplifier circuit board.