EasyManuals Logo

NAD 412 Specification Sheet

NAD 412
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
412
AM/FM Tuner
• 24 preset stations (12 FM, 12AM)
• 25kHz tuning steps
• NAD link
• Blend function
The NAD 412 has evolved from the award winning 402. The 402 was named "Best Tuner, 1994" by "What
Hi Fi". Improvements include a new high clarity display and a re-designed chassis.
The NAD 412 is a superlative product and it out-performs many other tuners that cost far more.
Employing high quality components in it's simple circuit topology give the unit (and it's predeccesor)
the noise free, low distortion performance that have made NAD tuners famous. Only the most essential
functions are employed resulting in an uncluttered front panel of a product that is simple to use.
24 stations (12 FM, 12AM) can be entered in the preset mode. They are stored in a non volatile memory
which allows the preset stations to remain in memory even if the unit is unplugged from the mains
supply.
Unlike most other tuners, the 412 tunes in 25kHz increments. This, coupled with crystal oscillator
controlled digital frequency synthesis makes for precise tuning and enables the user to fine tune to their
desired stations with ease. A centre tune LED indicates that the 412 is accurately locked to the
transmitted signal.
The SEARCH mode allows the 412 to tune to the nearest strong station, up or down the band, whilst the
TUNE mode allows rapid scanning through the band. In both modes the software "wraps" the frequency
band around allowing you to skip directly from the top of the band to the bottom or vice versa.
When attempting to listen to weak stations, sometimes the background noise can become annoying and
spoil the listeners enjoyment of the programme. The BLEND function reduces this noise whist still
retaining adequate stereo separation.
NAD link is provided, enabling the 412 to be remotely controlled by another NAD product that is also
fitted with NAD link and which has an IR sensor.

Other manuals for NAD 412

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NAD 412 and is the answer not in the manual?

NAD 412 Specifications

FM Tuner Section IconFM Tuner Section
usable sensitivity1.5 µV
50dB quieting mono2.5 µV
50dB quieting stereo30.0 µV
60dB quieting mono7.0 µV
60dB quieting stereo100 µV
capture ratio (45dBf)5 dB
IF rejection75 dB
AM suppression54 dB
selectivity, alternate channel78 dB
subcarrier suppression (19kHz and 38kHz)60 dB
THD mono 1KHz 50% mod.0.2 %
stereo L-R 1KHz 50% mod.0.3 %
stereo L+R 1KHz 50% mod.0.2 %
signal to noise ratio (65dBf IHF weighted) mono73 dB
signal to noise ratio (65dBf IHF weighted) stereo70 dB
frequency response (30Hz - 15kHz)±0.7 dB
channel separation (1kHz)40 dB
AM Tuner Section IconAM Tuner Section
usable sensitivity7 µV
selectivity19 dB
image rejection36 dB
signal to noise ratio (1mV input)45 dB
THD (30% mod., 1mV input)2 %
IF rejection46 dB
Physical Specifications IconPhysical Specifications
dimensions (W x H x D)435 x 76 x 295 mm
net weight3.6 kg
shipping weight4 kg
power consumption15 W

Related product manuals