Need help?Do you have a question about the NAD 4155 and is the answer not in the manual?
General| Brand | NAD |
|---|---|
| Model | 4155 |
| Category | Car Receiver |
| Language | English |
Provides effective reception of local medium-wavelength AM radio stations. Rod is mounted on a pivot for optimal positioning.
Connects external FM (75-ohm coaxial) and AM (four terminals) antennas for improved signal reception.
Connects the tuner's audio output (Left/Right) to an amplifier's input jacks via patch cords.
Adjusts the volume level of the tuner's output to minimize volume changes when switching amplifier inputs.
Connects the tuner to a switched or unswitched AC wall outlet for power supply.
Depress to switch the tuner on/off. Frequency display illuminates when power is on.
Disables stereo FM circuits for improved reception of weak or noisy stereo FM signals.
Silences noise between FM stations; disengage for weak signals.
Disables the dynamic separation circuit that reduces noise in weak FM stereo signals.
Shows frequency, signal strength, and tuning status for FM and AM stations.
LED illuminates when a stereo FM broadcast is received and decoded by the tuner.
Store and recall frequencies of ten favorite FM and AM stations using pre-set buttons.
Engages Memory Enter mode to store station frequencies into the ten pre-sets.
Switches between FM and medium-wave AM tuning bands.
Rocker switch to manually tune stations by shifting frequency up or down in steps.
Automatically scans for broadcast stations by stepping through frequencies in the selected band.
To Next Page
