NAD CI 940 - Page 5

SPECIFICATIONS
ENGLISHFRANÇAISESPAÑOLDEUTSCHNEDERLANDSSVENSKAРУССКИЙ
5
CI 940
Continuous Output Power 8 Ohms/4 Ohms
8 Ohms in Bridge Mode
4 x 35W (ref. rated THD, 20Hz-20kHz, all channels driven)
2 x 70W
Rated THD (250mW to rated power, CCIF IMD, DIM 100) ≤0.03% (ref. 20Hz-20kHz)
IHF Dynamic Power
8 ohms
4 ohms
2 ohms
55W
85W
95W
Damping Factor >180 (ref. 8 ohms, 50Hz and 1kHz)
Input Sensitivity 270mV (ref. rated power)
Voltage Gain 35dB
Frequency Response ±0.2dB (ref. 20Hz-20kHz)
-3dB at 3Hz and 100kHz
Signal/Noise Ratio, A-Weighted >95dBA (ref. 1W)
>110dB (ref. 35W)
Trigger 5-30V In (AC/DC)
-52dBV, 12V Out
Time to Automatic Standby (without signal at input sense mode) <10 minutes
GENERAL
Rated Power 270W (120V 60Hz, 230V 50Hz)
Idle Power <55W
Standby power <0.5W
Unit Dimension
(WxHxD) - Gross **
(includes knobs, terminals, feet and mounting brackets)
483 x 105 x 323mm
19 1/16 x 4 3/16 x 12 3/4”
Net weight 6.96kg (15.35lb)
Shipping weight 8.4kg (18.5lb)