Need help?Do you have a question about the NAD C340 and is the answer not in the manual?
General| Damping Factor | >100 |
|---|---|
| Input Sensitivity | 200mV |
| Dimensions | 435 x 100 x 290mm (W x H x D) |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 20k ohms |
| Power Output | 50W x 2 into 8 ohms (20Hz-20kHz) |
Guidelines for grounding outdoor antennas to protect against voltage surges and static charges.
Connects a tuner or line-level signal source via RCA cables.
Input for CD, Mini Disc player, or turntable signal.
Connects a CD player or other line-level analogue source.
Audio input for stereo VCR, TV, or satellite receiver.
Input for additional line-level audio sources like another CD player.
Connections for analogue recording and playback with a tape recorder.
Connections for a secondary audio tape recorder's analogue I/O.
Output for connecting to an external power amplifier or processor.
Input for connecting to an external pre-amplifier or processor.
Circuit to minimize audible distortion when the amplifier is overdriven.
Switch to turn the unit on or off; controls main power supply.
1/4" stereo jack for private listening; automatically switches off speakers.
Receives commands from the remote control handset.
Buttons to select the active input source for the amplifier.
LED indicator for the Soft Clipping mode status.
Adjusts the tonal balance (bass and treble) of the audio output.
Bypasses the tone control section for a direct signal path.
Adjusts the relative volume levels between left and right speakers.
Controls the overall loudness of the audio signal.
Procedure for recording audio signals to connected tape machines.
Instructions for copying audio from one tape machine to another.
Details on operating the amplifier and other NAD components via remote.
To Next Page
