To Next PageTo Next Page
Need help?Do you have a question about the NAD C320BEE and is the answer not in the manual?
General| Power Output | 50W x 2 (8 Ohms) |
|---|---|
| Input Impedance | 20k Ohms |
| Input Sensitivity | 200mV |
| Frequency Response | 20Hz - 20kHz (±0.3dB) |
| Damping Factor | >100 |
Covers reading instructions, cleaning, attachments, water, and accessory usage.
Covers power sources, cords, grounding, lightning, and overloading.
Covers conditions requiring service and replacement parts.
Guidelines for wall/ceiling mounting and ventilation space.
Specific safety and plug information for UK customers.
Controls unit standby and power on/off states.
Indicates unit status and protection circuit activation.
Socket for headphone listening, mutes speakers.
Receives commands from the remote control.
Buttons to select active input sources for the amplifier.
Adjusts bass, treble, and bypasses tone control section.
Adjusts left/right channel balance and overall loudness.
Indicates when the Soft Clipping mode is engaged.
Inputs for CD, Video, AUX, Tuner, and Disc sources.
Connects to tape recorders for recording and playback.
Outputs for external amplifiers, inputs for external processors.
Connects speakers, AC cord, and 12V trigger devices.
Controls power states and selects input sources.
Adjusts loudness and temporarily silences audio output.
Controls tuner frequency and direct track selection.
Controls CD playback functions like play, pause, and track skip.
Controls cassette playback, recording, and tape transport.
Sets remote transport keys for tape or CD control.
Diagnoses and solves problems related to no audio output.
Troubleshoots issues with audio only on one speaker channel.
Addresses problems with bass response and stereo imaging.
Solves problems with the remote control handset not working.
Diagnoses reasons for the power/protection LED turning red.
Technical details for the pre-amplifier stage.
Technical details for the power amplifier stage.
Dimensions, weight, and shipping weight of the unit.
