Nagman MTC 650 User Manual

NAG/IM/MTC650/01/22 23
Electric shock- condition that may pose shock to the user.
 This instrument must be plugged into a 230 /
110V AC, 50 / 60Hz, electric outlet only.
 The power cord of the instrument is
equipped with a three-pin grounding plug for
protection against electrical shock hazards. It
must be plugged directly into a properly
grounded three-pin socket. The receptacle
must be installed in accordance with local
codes and ordinances. Do not use an
extension cord or adapter plug.
 Always replace the power cord with an
approved cord of correct rating and type.
 If supplied with user accessible fuses, always
replace the fuse with one of the same rating
voltage and type
 If a main power supply fluctuation occurs,
immediately turn off the instrument. Power
bumps from brown-outs could damage the
instrument. Wait until the power has
stabilized.

Nagman MTC 650 Specifications

General

Brand	Nagman
Model	MTC 650
Category	Test Equipment
Language	English