EasyManua.ls Logo

Nagra CLASSIC AMP User Manual

Nagra CLASSIC AMP
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
P/N: 2055028151
All rights reserved © 2020 rev1
CLASSIC AMP
Instruction manual

Questions and Answers:

Nagra CLASSIC AMP Specifications

General IconGeneral
Input Impedance10 kΩ
Weight12 kg
Signal-to-Noise Ratio> 100 dB
Inputs1 x XLR
OutputsSpeaker
Total Harmonic Distortion< 0.1%

Summary

Important Safety Warnings

General Safety Precautions

Read manual, avoid opening, use qualified personnel, ensure correct voltage.

Warranty Information

Product Warranty Coverage

Three-year warranty against manufacturing defects; void if serial number removed.

Installation and Setup

Positioning the CLASSIC AMP

Optimal placement for thermal dissipation and recommended accessories for vibration control.

Front Panel Presentation

Overview of the amplifier's front panel controls, indicators, and meters.

Rear Panel Overview

Identification and function of connectors and switches on the amplifier's rear.

Input and Mode Configuration

Details on input types (RCA/XLR), sensitivity adjustment, and operational modes (NORM/BRIDGE).

Ground and Remote Connections

Using the ground connector to prevent hum and remote connection for power control.

Output Section Modes

Explanation of normal stereo, bi-amping, and bridge mode speaker connections.

Bridge Mode Operation

Instructions for setting up and using the amplifier in bridge mode for higher power output.

Mains Cable Connection and Power On

Steps for connecting the mains cable and operating the amplifier's power switch and selector.

Security and Protection Systems

Protection Mode Activation

Understanding the amplifier's protection system, indicator lights, and reset procedure.

Protection Against Fault Conditions

How wrong voltage, clipping, short circuits, and DC faults trigger protection modes.

Troubleshooting and Features

Thermal Shutdown and Recovery

Causes and behavior of thermal shutdowns and automatic recovery.

Modulometer Operation and Brightness

Functionality and brightness adjustment of the output power level indicator.

Troubleshooting Common Issues

Table of common issues, their causes, LED status, and recommended actions.

Technical Specifications

Declaration of Conformity

Related product manuals