To Next Page
J
Joseph StanleyJul 27, 2025
Why is my Nagra Amplifier showing light clipping?
- DDavid SinghJul 27, 2025
Light clipping is normal. Consider reducing the listening volume.
Why is my Nagra Amplifier showing light clipping?
Light clipping is normal. Consider reducing the listening volume.
General| Type | Integrated Amplifier |
|---|---|
| Total Harmonic Distortion | < 0.1% |
| Signal-to-Noise Ratio | > 100 dB |
| Power Output @ Impedance | 100 W RMS (8 Ω) |
| Frequency Response | 10 Hz |
| Input Impedance | 47 kOhm |
| Inputs | 3 x RCA, 1 x XLR |
| Outputs | Pre-out |
Read manual, contact dealer for questions, do not open, ensure correct voltage. Avoid user negligence and misuse.
Steps to turn on the amplifier using the mains switch and understanding the main selector positions.
Guide to accessing and navigating the CLASSIC INT's menu using the controller knob.
Explains the amplifier's automatic shutdown mechanism ('Protection Mode') triggered by various faults.
Covers protection against incorrect mains voltage and amplifier clipping.
Correlates RED LED status with causes like mains voltage issues or light clipping and suggests actions.
Troubleshoots amplifier shutdowns due to clipping, overheating, DC problems, or short-circuits.
