Need help?Do you have a question about the Nagra HD PREAMP and is the answer not in the manual?
Essential precautions for safe operation, electrical safety, and handling.
Details the product warranty, coverage period, and conditions.
Lists all items included in the HD PREAMP box for verification.
Guidance on selecting an optimal and safe installation site for the unit.
Instructions for leveling the chassis using adjustable feet and ceramic balls.
Steps to connect the power supply and prepare the unit for initial power-up.
Procedure for safely connecting the device to the mains power outlet.
Guide to correctly connect and disconnect the essential LEMO umbilical cables.
Instructions on how to safely replace the internal fuse if it blows.
Overview of controls, indicators, and the modulometer on the front panel.
Explanation of all connectors and ports on the rear of the audio device chassis.
Details on available audio inputs and how to set their sensitivity levels.
How to use the bypass inputs for connecting secondary systems.
Description of XLR and RCA outputs, including balance and grounding options.
Identifies ports like REMOTE, STATUS LED, and Mains inlet on the PSU.
Explains the purpose and application of the ground post for setup issues.
Steps to power on the unit and select the desired audio source.
How to choose between XLR and RCA outputs for amplifier connection.
Understanding the modulometer's role in setting optimal audio levels.
How to adjust the intensity of the modulometer and display backlights.
Controls which audio signal (input/output) is shown on the modulometer.
Managing synchronized or independent volume controls and warning indicators.
How to engage or disengage the audio mute function using the switch.
Guide to operating the HD PREAMP using the provided IR remote control.
Instructions for charging the remote control's Li battery using the docking station.
Information for programming third-party universal remotes for the HD PREAMP.
Controlling the unit and system configurations via remote automation interfaces.
Connecting the HD PREAMP to home automation systems using RS232.
Recognizing audible and sonic signs indicating tube wear over time.
Steps for updating the device firmware using MicroSD memory cards.
Recommended method for cleaning the unit's external chassis to prevent damage.
To Next Page
General
