Safety warnings
• Read this manual carefully before operating the HD PREAMP.
• Should you have any questions on how to setup or use your HD PREAMP, please
contact your Nagra dealer.
• Audio Technology Switzerland SA declines any responsibility in the event of an
accident caused by the non-observance of these instructions or any other form
of user negligence.
• The HD PREAMP has a specific power supply to work correctly in your country.
The power supply voltage can only be changed at the factory. Make sure you have
the right operating voltage before switching your device ON.
• The HD PREAMP is CLASS I equipment. It is essential that it is connected to a
MAINS socket outlet with a protective earthing connection.
• The HD PREAMP must not be exposed to dripping or splashing liquids and no
objects filled with liquids, such as vases, should be placed on the machine.
• Never try to open your HD PREAMP when it is powered to prevent the risk of
electric shock and burns. Switch it OFF, remove the MAINS cable from the
appliance inlet and wait at least 15 minutes before any intervention into your HD
PREAMP such as for tube exchange or IR Remote Control Unit channel selection.
If you are unsure, please contact your Nagra dealer.
SAFETY WARNINGS WARRANTY//
HD PREAMP
01
To Next Page
Loading...
