Nagra HD DAC - Input Assignment

13
Nagra – HD DAC
Reseting input names
If you are unhappy with the name you have chosen, you can reset all the input
names to “Factory Settings”.
Go in the Input Names Menu, scroll to the last one:
Press and hold the Controller button and all the
names will be reset.
Input assignment
The HD DAC features a wide array of inputs. You may not need all of them. To
make input selection easier, you can decide which input you want to be active,
and on which remote button it will be accessible.
In the Menu, go to “INPUT ASSIGNEMENT”
Select this menu
Select the input you want to de-activate
For each input, you can select the following:
DISABLED - The input is deactivated
REMOTE BUTTON A to F Allocate the remote letter you want of
choice for any input
NO REMOTE BUTTON The input is active, but does not have a
remote button assigned to it. However,
you can activate it using the
CONTROLLER button.
If you wish to return to the factory settings on the input assignment function, in
the input selection, you can scroll to “
Press and hold the Controller to restore factory
settings.
DEFAULT NAMES
PRESS CTRL
INPUT ASSIGNMENT
AES 1
DEFAULT ASSIGN
PRESS CTRL