Flash and NARCOM 3
AV (av processor mode)
Page 1 of 3
Selects the previous input.
Selects the previous decode mode.
Selects the next decode mode.
Selects On Screen Display operational mode
and shows current system status.
Switches the processor display on and off.
Selects midnight operational mode.
Directly selects processor inputs.
Page 2 of 3
The master key functions on
switches the function
of the numeric keys to selection of processor decode modes.
Page 3 of 3
Selects the previous AV setup parameter or
moves the OSD cursor upwards.
Selects the next AV setup parameter or moves
the OSD cursor downwards.
Selects the previous AV parameter value or
moves the OSD cursor to the left.
Selects the next AV parameter value or moves
the OSD cursor to the right.
Selects into input setup mode.
Selects speaker setup mode.
Confirms option selection during OSD control.
Clears option selection during OSD control.
No function.
17.3 CD Track Programming
In
key (display Page Two) enables specific CD
tracks and their play order to be programmed.
To program a play order select a track number from the
key until the desired selection is
complete. During selection, the track number indicated in the
display will be followed by either
indicates that the
track is selected,
indicates that the track can be selected.
The
key can also be used to delete tracks from a play
order. To delete a track, press and hold the
key until the
prog indicator in the CD display illuminates then delete the
track or tracks using the
keypad followed each time
by a further operation of the
key. During deletion the track
number indicated in the player display will be followed by either
indicates that the track deleted,
indicates
that the track can be deleted while no display indicates that this
is the only track remaining and therefore cannot be deleted.
A random play order can be programmed (from stop with no play
order already in place) by pressing
. Similarly,
to program a reverse play order, press
.
Play orders can be reviewed by pressing
while the player
is either stopped or playing. The player display will then scroll
through the selected tracks. The prog indicator on the player
display will illuminate when a play order has been programmed.
To clear the program memory press and hold the
key.
18.1 Introduction
NARCOM 3 is a multi-functional remote control handset
designed to be used with Naim Audio CD players,
integrated amplifiers, preamplifiers and preset tuners.
The handset control configuration is based around three
types of keys: System Component Keys, Global Keys and
Soft Keys.
18.2 System component keys
These keys switch
the operation of the
into modes
appropriate to each
system component
(CD, tuner, preamp,
record).
Switches the
action of the Soft Keys
to that appropriate for
a CD player.
Switches the
action of the Soft Keys
to that appropriate for
a preset tuner.
Switches the
action of the Soft Keys
to that appropriate
for an integrated or
preamplifier.
Switches
the action of the
Soft Keys to select
record inputs on
appropriately equipped
preamplifiers.
18.3 Global Keys
These keys operate specific component functions regardless of
the System Component Key setting.
Preamplifier
Adjusts the preamplifier volume and the volume
control position.
Reduces the preamplifier volume to zero. A second
press restores the volume.
Adjusts the channel balance. Some Naim
amplifiers have control of channel balance
available only from the remote handset. On these
products the balance will automatically centre
as it reaches the mid point. Centring is indicated
by a flashing volume control indicator. To resume
adjustment once the balance has centred, the
key must be released and re-pressed.
To Next Page
Loading...
