13
keys will select tuner presets or tuner frequency. In record
mode the numeric keys will switch between record inputs
on appropriately equipped preamplifiers.
12.5 cd track programming
In CD mode the prog key enables specific tracks and their
play order to be programmed. To program a play order
select a track number from the numeric keypad followed by
the prog key until the desired selection is complete. During
selection the track number indicated in the player display
will be followed by either
P or — or no display. P indicates
that the track is already selected, — indicates that the
track can be selected while no display indicates that there
is no more memory available.
The prog key can also be used to delete tracks from a play
order. To delete a track, press and hold the prog key until
the prog indicator in the CD display illuminates then delete
the track or tracks using the numeric keypad followed each
time by a further operation of the prog key. During deletion
the track number indicated in the player display will be
followed by either
c or —— or no display. c indicates that
Narcom 3 Handset
the track is already deleted, —— indicates that the track
can be deleted while a space indicates that there is no
more memory available.
The play order can be reviewed by pressing prog while the
player is either stopped or playing. The player display will
then scroll through the selected tracks. The prog indicator
on the player display will illuminate when a play order has
been programmed. To clear memory press and hold the
stop key.
In cd mode the disp key will scroll through these options:
tracks (“time” indicator off), time (“time” indicator on) and
display off.
Declaration of conformity to appropriate standards
Manufacturer
Naim Audio Limited, Southampton Road, Salisbury, England, SP1 2LN
Products
CDX2, XPS, CD5
Safety
HD 195-S6
EN 60 065
EMC
Emissions Tested to: EN 55013 - Sound and television broadcast receivers and associated equipment
Immunity Tested to: EN55020 - Electromagnetic immunity of broadcast receivers and associated equipment
In accordance with: CISPR 16-1 - Radio disturbance and immunity measuring apparatus
CISPR 16-2 Methods of measurement of disturbances and immunity
IEC 801-2 8KV (air gap) 4KV (contact) (performance criterion B)
IEC 801-3 3V/m 20dB (performance criterion A)
IEC 801-4 1KV (AC lines) 0.5KV (signal lines) (performance criterion B)
To Next Page
Loading...
