It is most important that the game is tested and any problems
rectified before any conversion work is started.
Please make a note of all setting values so that the new Game
PCB can be set accordingly.
Warning: Ensure that the game is switched off and disconnected from the
mains supply before any conversion work is started.
Caution: Ensure adequate space is available to able to remove the header
safely.
Note: Take care when removing items not to lose any screws and washers as
they may be required for reassembly.
Tools Required:-
No1 Pozi Driver
No2 Pozi Driver
Security Wrench for M5
Spanner for M10
Spanner for M20
Security Torx Wrench for M5 (Supplied in kit)
To Next Page
Loading...
