Nanit N111 - Attaching Elbow Joints; Installing Horizontal Cable Covers

1918 Assembly Assembly
A S S E M B LY///
Choose the left or right elbow joint
depending on where your power outlet is located.
Attach the elbow joint.
Start to attach the horizontal cable covers.
You’re in the home stretch!
Peel o
2 tape
backings.
right left
Make sure the cable is tucked
inside the elbow and aligned
at the center then press firmly.
Peel o
2 tape backings
at the back of
the cable cover.
Feel with your fingers
and make sure the cable
is pressed into the
middle grooves under-
neath the cable cover.
Press and
click first.