EasyManuals Logo

Nanni N4.115 Operator's Manual

Nanni N4.115
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
EVERY 200 OPERATING HOURS / AT LEAST EVERY YEAR.
Change the engine and transmission oil *.
Change the oil filters *.
Change the fuel filters *.
Check the raw water pump impeller. Change if needed.
Check the engine flexible mountings. Adjust as necessary *.
Clean the Turbo Wastegate.
Clean and touch up the paintwork as necessary.
EVERY 400 OPERATING HOURS / AT LEAST EVERY 2 YEARS.
Change the thermostat of the heat exchanger.
Change the heat exchanger filler plug.
Drain and change the coolant. Clean the coolant system.
Check and clean the heat exchanger tube stack. Change the O-ring.
Check and clean the air cooler tube stack. Change the O-ring. Check
and clean the transmission oil cooler tube stack.
Check the fuel injection nozzles. Change if needed.
Check cold valve clearance.
Check and clean the Turbo
EVERY 1000 OPERATING HOURS / AT LEAST EVERY 4 YEARS.
Change the flexible engine mounts
32

Other manuals for Nanni N4.115

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nanni N4.115 and is the answer not in the manual?

Nanni N4.115 Specifications

General IconGeneral
BrandNanni
ModelN4.115
CategoryEngine
LanguageEnglish

Related product manuals