To bleed the fuel system IF IT IS
FITTED WITH AN ADDITIONAL
ELECTRIC FUEL FEED PUMP :
1. Fill totally the fuel tank. Open
the fuel cock.
2. Loose the venting screw
. Use rags around the venting
screw.
3. Start the engine for 5 to 10 sec-
onds to let the electric fuel feed
pump bring fuel to the injection
pump.
4. Pump the fuel using the lever
until fuel free of air bubbles
flows from the venting screw.
5. Continue pumping and at the
same time tighten the venting
screw.
6. Pump few other times to prime
the system.
I CAUTION
Avoid draining all fuel in the filter
38
To Next Page
Loading...
Need help?
General
