4
Menu Options
1. Press the menu button on the monitor unit to display the main menu on
the screen (See Fig. 13).
2. Use the brightness down and brightness up buttons to navigate
through the menu.
3. Press the Zoom/OK button to confirm a setting.
4. The main menu contains 5 submenus.
Camera Selection ( Camera Select )
In this submenu you can select between multiple cameras if the cameras have
been paired. Also, you can tap the auto-scan icon for auto-scan function.
An auto-scan feature will display images from each camera in eight-second
intervals. (See Fig. 14).
Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing (See Fig.
15).
Camera Setting ( Camera Setting )
The system comes with a camera unit that has already been paired with the
monitor unit. The"Cam Setting" function gives each baby unit a separate
channel on the monitor unit. This is necessary for configuring additional camera
units.
1. If you want to add a new camera, please choose which number of cameras
you want to add, and then select add camera icon and press the button
to confirm your selection (See Fig. 16).
The screen will show"Press the pairing button on the Baby unit" , and then
please also press and hold the power button on thearound 3 seconds
camera side at the same time.
2. If you want to delete a paired camera, please choose which number of
cameras you want to delete, and then select delete camera icon to delete
the camera (See Fig. 16).
VOX Sensitivity ( VOX Sensitivity )
This submenu lets you choose the VOX (voice activation) sensitivity level.
When the level set to high, the screen will turn on by lower sounds. (See Fig.17).
3
3.1
3.2
3.3
3.4
Fixing the Camera / Befestigung der Kamera / Fijación de la cámara
/ Befestigung der Kamera / Fissaggio della videocamera
Fits screw, M6
To Next Page
Loading...
