ADAMII™ © 2016 NanoEntek, Inc.
23
Operation
Insert
assay slide
5. Close the door of the ADAMII™.
6. Select the Sample type.
7. Press the ‘Insert/Eject’ button on top of the instrument, or “Insert
sample’ button on the PC software. The slide will automatically be
moved into the instrument.
Warning:
• Do not look inside the ADAMII
TM
instrument when the door is open.
Direct exposure to high-energy LED light may be harmful to the eyes.
☞
Note: LED light of the ‘Insert/Eject’ button shows the status of
the slide holder.
•
Slide inserted – On
•
Slide ejected - Off
•
Slide inserting and ejecting - blinking
To Next Page
Loading...
Need help?
General